LED 208 - Screen speakers for LED
The LED 208 is a very slim yet powerful speaker designed specifically for LED screens. It is intended for use in situations where space limitations or strict aesthetic demands make larger speakers unsuitable.
The complete three-cabinet setup can be suspended horizontally from the ceiling as the center cinema channel or mounted vertically on the wall using U-brackets or extendable wall beams. This flexible configuration enables the LED TOP 208 to be accurately panned or tilted to target the Reference Listening Position (RLP).
Low frequencies are enhanced by two dual 8-inch LED SUB 208 bass management subwoofers.
The Screen speakers LED 208 set for the LED consists of two LED SUB 208 and one LED TOP 208: | |||
|---|---|---|---|
| Main | |
|---|---|
| Type | Screen speakers for LED |
| Acoustical & Electrical data | |
| Frequency response (-6dB) | 40 – 18000 Hz |
| Max recommended room length | 12 m / 39 ft |
| SPECIFICATIONS SUB | |
| Max SPL (peak) 2 | 120 dB |
| Sensitivity (1W/1m) (half-space) 1 | 93 dB (1 pcs) |
| Driver | 2 x 8” |
| Nominal impedance | 8 Ohm |
| Rated power 3 | 500 W (1 pcs) |
| Recommended amplifier power | 500 W (1 pcs) |
| Connectors | Phoenix |
| Enclosure materials | Plywood, MDF; wear-resistant paint |
| Mounting | 16 x M8 mounting points; M10 safety points |
| Color | Black |
| Dimensions | 640 x 220 x 452 mm / 25,2” x 8,66” x 17,8” |
| Net weight | 20,2 kg / 44,5 lbs |
| Gross weight | 22,2 kg / 49 lbs |
| SPECIFICATIONS TOP | |
| Max SPL (peak) 2 | 125 dB |
| Sensitivity (1W/1m) (half-space) 1 | 97 dB |
| Driver | 2 x 8" woofer (2,5” VC), 1,5” driver (3” VC, titanium dome) |
| Horizontal coverage | 110° |
| Coverage Vertical 4 | 40° |
| Nominal impedance | 4 Ohm |
| Rated power 3 | 600 W |
| Recommended amplifier power | 600 W |
| Connectors | Phoenix |
| Mounting | 2 x M10 and 6 x M8 mounting points; M10 safety points |
| Enclosure materials | Plywood, MDF; wear-resistant paint |
| Color | Black |
| Dimensions | 950 x 220 x 250 mm / 37,40” x 8,66” x 9,84” |
| Net weight | 17,6 kg / 38,8 lbs |
| Gross weight | 19,6 kg / 43,2 lbs |
2 dBSPL peak, IEC 60268-5 pink noise, measured on nominal power, 6 dB crest factor
1 dBSPL, IEC 60268-5 pink noise, 1 W / 1 m
3 2 hour power test, IEC filtered noise, 6 dB crest factor
4 Optimized coverage HF horn has a wider dispersion in the near-field and narrower in the far field. HF horn has a 40° vertical coverage and a radiation axis aiming 15° down from the horizontal plane. At an upper vertical threshold (5° up from horizontal plan) speaker has a horizontal coverage of 60°. At a lower vertical threshold (35° down from horizontal plan) speaker has a horizontal coverage of 90°
