DCQ-8000 - DSP series

DCQ-8000 - DSP series
Nominal power rating (single channel, 4 Ohm)
CH 1 2000 W
CH 2 2000 W
CH 3 2000 W
CH 4 2000 W
Nominal power rating (single channel, 8 Ohm)
CH 1 1000 W
CH 2 1000 W
CH 3 1000 W
CH 4 1000 W
Nominal power rating (bridge, 8 Ohm)
CH 1+2 3000 W
CH 3+4 3000 W
Nominal power rating (single channel, 16 Ohm)
CH 1 600 W
CH 2 600 W
CH 3 600 W
CH 4 600 W
Nominal power rating (bridge, 16 Ohm)
CH 1+2 2000 W
CH 3+4 2000 W
Main
Functions Input gain, Input-to-output matrix, Room graphic, parametric, EQ, Hi and Lo shelf, Delay, Speaker presets, Output gain, Master volume, mute, stand by, Status monitoring, Automation commands
Frequency range 20 Hz - 20 kHz
Channel count 4
Amplifier Class D high efficiency
Input sensitivity +16 dBu / +4 dBu selectable
Maximum input level +22dBu / 10 dBu
Input impedance 10 kOhm unbal., 20 kOhm bal.
Crosstalk separation 100 dB @ 1 kHz
THD <0.5%
Power consumption, 1/8 of max output power @ 8 Ohm 1000 W
Dampling factor, 8 Ohm > 500 @ 1kHz
S/N ratio, analog 100 dB
Connectors 8x 3-pin Phoenix input, 2x 4-pin Phoenix output, RJ-45 Ethernet, RJ-45 AES 1-8 input, RJ-45 AES 9-16 input, RJ-45 AES 1-8 link, RJ-45 AES 9-16 link, C19 mains input
Dimensions (W × H × D) 486 × 87 × 505 mm, 2U
Net weight 9,7 kg
Acoustical & Electrical data
DSP Full DANA compatibility 24bit 96kHz