DCO-6000 - ANALOG series

Nominal power rating (single channel, 4 Ohm)
CH 1	750 W
CH 2	750 W
CH 3	750 W
CH 4	750 W
CH 5	750 W
CH 6	750 W
CH 7	750 W
CH 8	750 W
Nominal power rating (single channel, 8 Ohm)
CH 1	400 W
CH 2	400 W
CH 3	400 W
CH 4	400 W
CH 5	400 W
CH 6	400 W
CH 7	400 W
CH 8	400 W
Nominal power rating (bridge, 8 Ohm)
CH 1+2	1400 W
CH 3+4	1400 W
CH 5+6	1400 W
CH 7+8	1400 W
Nominal power rating (single channel, 16 Ohm)
CH 1	200 W
CH 2	200 W
CH 3	200 W
CH 4	200 W
CH 5	200 W
CH 6	200 W
CH 7	200 W
CH 8	200 W
Nominal power rating (bridge, 16 Ohm)
CH 1+2	700 W
CH 3+4	700 W
CH 5+6	700 W
CH 7+8	700 W
Main
Functions	Input gain, Input-to-output matrix, Room graphic, parametric, EQ, Hi and Lo shelf, Delay, Speaker presets, Output gain, Master volume, mute, stand by, Status monitoring, Automation commands
Frequency range	20 Hz - 20 kHz
Channel count	8
Amplifier	Class D high efficiency
Input sensitivity	+16 dBu / +4 dBu selectable
Maximum input level	+22 dBu / 10 dBu
Input impedance	10 kOhm unbal., 20 kOhm bal.
Crosstalk separation	100 dB @ 1 kHz
THD	<0.5%
Power consumption, 1/8 of max output power @ 8 Ohm	750 W
Dampling factor, 8 Ohm	> 500 @ 1 kHz
S/N ratio, analog	100 dB
Connectors	8x 3-pin Phoenix input, 2x 4-pin Phoenix output, RJ-45 Ethernet, RJ-45 AES 1-8 input, RJ-45 AES 9-16 input, RJ-45 AES 1-8 link, RJ-45 AES 9-16 link, C19 mains input
Dimensions (W×H×D)	486 × 87 × 505 mm, 2U
Net weight	10 kg
Acoustical & Electrical data
DSP	Full DANA compatibility 24bit 96kHz