DC 600A - Digital Cinema Amplifier Platform
DC series is a versatile signal distribution and amplification platform for cinemas.
DC series presents a new approach to cinema system design. Based on many years of experience in cinema installations, it features smart, efficient design while providing innovative options for brand new theaters.
Based on energy-effective and lightweight class D amplification with switch-mode power supply, DC series offers a complete power range to fit a cinema installation of any size.
Followed by a modern DSP, remote controll via dedicated software suite and avaliable in “A“ versions digital AES/ EBU input capability, DC series is easy to integrate and use in modern automated cinema delivery systems.
• World-class amplification involving class D architecture with switch-mode power supply provides cost-effective operation and less environmental footprint.
• Operation capacity into 4 Ohm, 8 Ohm and bridged connection provides wide range of wiring for different cinema channels and theatre sizes.
• Modern built-in DSP provides necessary input/output matrix, crossover, equalization, alignment delays, limiter and protection for easy system building and smooth operation.
• DC series is supplied with database of ready speaker presets for MAG Cinema systems, further reducing tune-up times while ensuring better protection and trouble-free operation.
• Automatic impedance control system assists in quick speaker failure detection and elimination.
• Dedicated Theatre Control software suite, available for free from manufacturer’s website, serves as control centre for entire theatre sound installation, providing userfriendly interface for tuning, controls, monitoring, and preset management.
• Networking-enabled DC 600AE, DC 1200AE, DC 1208AE and DC 3000AE versions can be used to create and control a group of amplifiers for direct connection with cinema server. Along with control inputs for TMS integration, it allows building a cinema sound system without additional speaker processor.
Main | |
---|---|
Frequency range | 20 Hz - 20 kHz |
Channel count | 2 |
Nominal power, per channel, 4 Ohm load | 300 W |
Nominal power, per channel, 8 Ohm load | 200 W |
Nominal power, two channels bridged, 8 Ohm load | 600 W |
Nominal power, two channels bridged, 16 Ohm load | 400 W |
Amplifier | Class D high efficiency |
Presets | Built-in MAG Cinema speaker presets |
DSP speaker controls | 6 parametric EQ, volume, polarity |
DSP utility controls | Power saving mode, power-up mode, 3-level password protection |
Input sensitivity | +5dBu |
Maximum input level | +20dBu |
Input impedance | 18 kOhm unbal., 36 kOhm bal. |
Crosstalk separation | 85 dB @ 1 kHz |
THD | <0.08% from 0.1 W to full power (typically <0.05%) |
Power consumption, 1/8 of max output power @ 8 Ohm | 110 VA |
Dampling factor, 8 Ohm | > 10000 @ 100 Hz |
S/N ratio, analog | 100 dB |
S/N ratio, digital AES/EBU | 114 dB |
Connectors | 3-pin Phoenix input, 3-pin Phoenix link, C13 mains input, RS-485 Ethernet input/link; 2x RJ45 AES/EBU digital input |
Network | IP protocol adapter (DC 600AE, DC 1200AE, DC 1208AE, DC 3000AE) |
Dimensions (W × H × D) | 480 × 90 × 255 mm, 2U |
Net weight | 5,25 kg |